Nav Header Nav Header Nav Header Black Can Foam

BLACK CAN FOAM

Technical Information

Black Can Foam

This black can foam is UV-resistant and is specially formulated to blend in with landscaping, RV, automotive, HVAC and other applications. No need to paint when used outdoors. Also, the black foam is closed cell minimal expansion so it is very durable and will resist the movement of air and moisture through a crack or joint.

• Yield (linear feet)-- 1/4" bead - 3200-- 3/8" bead - 1420• Density - 1.2-1.8 lbs./cu.ft.• R Value - 4.5 per inch thickness• Max. Service Temp for Cured Foam - 250ºF (121ºC)• Shelf Life - 12 months• Flame Spread - 15• Smoke Developed - 25* Effective AgSeal & Flex Seal on cracks & joints.

Assembly Instructions

Gun Foam Use Guidelines

ALWAYS review and follow the directions provided in your foam kit. The below instructions are a general overview. ENSURE you follow all safety precautions including wearing protective eyewear and gloves.

1. Apply petroleum jelly to gun basket before attaching can. 2. Point gun in a safe direction (into a trash can), depress trigger and screw can onto gun basket. Do not over-tighten. 3. After attaching gun to can, shake vigorously for 30 seconds. 4. Press trigger to dispense foam with can upside down. Test bead size on scrap material. 5. Fill cracks and gaps as needed, allowing space for foam expansion. 6. Foam can be trimmed, painted, sanded or plastered after curing completely.

Can Replacement:

1. Point gun in safe direction, depress trigger and quickly remove empty can. 2. Spray gun basket with PolyClean gun cleaner and immediately attach a new can to prevent foam from hardening in the gun. 3. Follow directions above.

Storage:

1. Turn off gun flow control knob at back of gun. 2. Store can upright with gun attached. 3. To restart, shake well for 30 seconds, open flow control knob and dispense foam. Maximum storage: 15 days.

Gun Applicator

Poly Cleaner

Poly Cleaner Use Guidelines

ALWAYS review and follow the directions provided in your foam kit. The below instructions are a general overview, meant to accompany the reference photos. ENSURE you follow all safety precautions including wearing protective eyewear and gloves.

Do not apply poly cleaner to furniture or any other finished surface.

* Insert attached adapter into valve opening and press to dispense a small amount of Poly-Clean to a cloth for cleaning hands, tools, and gun baskets. (Figure 1)

* Attach the cleaner can to your gun and spray as you would any gun foam to thoroughly clean your applicator gun. (Figure 2)